Description

Elfa Turbo Refillable Pod Pack

The Elf Bar Elfa Turbo refillable pod gives the Elfa Turbo kit a fresh 2ml pod whenever flavour starts to fade or the coil tires. Each pack contains two empty pods, both built with QUAQ mesh, ready to fill with any 10ml nic salt or 50/50 e-liquid the wearer fancies. Two resistance options are available, and the 1.1Ω version slots into every Elfa series device, not just Turbo, which means anyone running an Elfa or Elfa Pro alongside their Turbo can keep one pod stock across the family.

Key Features

• 2ml Refillable Pod – TPD-compliant capacity ready for any 10ml e-liquid
• QUAQ Mesh Coil Built-In – faster wick saturation and brighter flavour from first puff
• 0.8Ω and 1.1Ω Options – airier near-RDL or tighter MTL draw from the same pod range
• Side-Fill Rubber Stopper – quick top-ups without removing the mouthpiece
• Two Pods per Pack – roughly a fortnight of vaping for most users at average use
• 1.1Ω Cross-Compatible – drops into Elfa, Elfa Pro and Elfa Turbo devices

Side-Fill Refill System

Lift the rubber stopper on the side of the pod, drip 10ml e-liquid straight in until the window reads full, then press the stopper back flush. The fill port sits well above the coil well, so leakage is rare provided the stopper is seated properly and the pod stands upright for two minutes after filling. No fiddly screw threads, no syringe needed – the design suits anyone moving across from disposables for the first time.

0.8Ω versus 1.1Ω – Which to Pick

The 0.8Ω pod runs warmer and produces noticeably more vapour, sitting closer to a restricted direct-to-lung draw when paired with Turbo Mode on the parent Elfa Turbo kit. It only works inside the Turbo device itself, so the airier draw is unique to that pairing. The 1.1Ω pod is the classic mouth-to-lung partner – tighter draw, cooler vapour, longer pod life across a tank of e-liquid. It is the version that drops into older Elfa and Elfa Pro devices too, which makes it the safer choice for anyone running multiple Elfa kits in rotation.

Pairing with ELFLIQ Nic Salts

Both pods drink nicotine salts and 50/50 freebase e-liquids in equal measure, though the smooth throat hit of a salt formula tends to suit the MTL draw best. The matching ELFLIQ nic salt range is the obvious pairing – same flavour house as Elf Bar disposables, 10mg and 20mg strengths, designed around the QUAQ coil tolerances. Anyone wanting a softer hit can also reach for any TPD-compliant 50/50 e-liquid in 10mg or under.

How to Refill Your Elfa Turbo Pod

• Remove the pod from the Elfa Turbo device and turn it on its side.
• Locate the small rubber stopper on the side of the pod and lift it gently with a fingernail.
• Slowly drip the chosen e-liquid into the fill port, watching the level rise through the clear window.
• Stop at the maximum line, press the stopper firmly back into place and wipe any excess from the outside.
• Stand the pod upright for two to three minutes so the QUAQ mesh fully saturates before clicking it back into the kit.

Compatibility with Elfa Series Devices

The 1.1Ω resistance is the universal one – Elfa, Elfa Pro and Elfa Turbo all accept it without any setting tweaks. The 0.8Ω is exclusive to the Elfa Turbo body since that device is the only one in the family with the wattage headroom to drive the lower resistance comfortably. Anyone with a mixed Elfa drawer can simplify by keeping a stock of 1.1Ω pods alongside one or two 0.8Ω for Turbo Mode sessions.

What’s in the Pack

• 1 x Elf Bar Elfa Turbo Refillable Pods (2 pack)